{"title":"Wire Rope Fittings","description":"\u003cp\u003eGalvanised wire rope clamps (DIN 741 U-bolt cable clips) for 3-14mm rope and galvanised steel wire rope thimbles to DIN 6899 B for 3-20mm rope.\u003c\/p\u003e","products":[{"product_id":"galvanised-wire-rope-clamp-din-741-u-bolt-cable-clip","title":"Heavy-Duty Galvanised Wire Rope Clamps (DIN 741 U-Bolt Cable Clips)","description":"\u003cp\u003e\u003cstrong\u003eGalvanised steel U-bolt wire rope clamps manufactured to DIN 741\u003c\/strong\u003e, the recognised specification for this style of U-bolt wire rope clip, used to terminate and secure wire rope by clamping a loop back onto itself. Each clamp is formed from a U-bolt, a grooved saddle plate and two nuts; tightening the nuts draws the saddle down onto the rope, pinching the standing and dead ends of the rope together to hold the loop closed. As a DIN-specification part, the U-bolt, saddle and nuts for each size are dimensioned as a matched set, rather than needing to be sourced separately and paired by eye. This type of termination is typically formed around a thimble (sold separately), which sits inside the loop to protect the rope from sharp bending and keep the loop shape true.\u003c\/p\u003e\n\u003cp\u003eEach clamp size in the range is matched to a specific U-bolt thread diameter, so the clamp is sized correctly for the rope diameter it is intended to grip. Using the correct clamp size for your rope - rather than simply \"a similar size\" from a mixed set - is what gives the finished joint its intended holding strength: an oversized or undersized clamp will not seat correctly on the rope, and can damage the outer strands or fail to grip properly rather than clamping cleanly. The galvanised steel construction is intended to give the clamp the corrosion resistance to sit outdoors long-term, since wire rope terminations of this kind are very often part of an outdoor fencing, balustrade or rigging run that is exposed to the weather for the life of the installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to DIN 741, the recognised standard for U-bolt wire rope clips, so dimensions and thread sizes are matched consistently across the whole range\u003c\/li\u003e\n\u003cli\u003eGalvanised steel construction for corrosion resistance in outdoor rigging, fencing and agricultural environments\u003c\/li\u003e\n\u003cli\u003eEight matched sizes spanning rope diameters from 3mm (≈0.12″) up to 14mm (≈0.55″), with U-bolt threads from M4 up to M10\u003c\/li\u003e\n\u003cli\u003eSimple bolt-up fitting - the U-bolt and grooved saddle clamp the loop shut with two nuts, with no swaging or specialist crimping tools needed\u003c\/li\u003e\n\u003cli\u003eSize-matched by design, so each clamp grips its intended rope diameter correctly rather than a \"one size fits most\" compromise\u003c\/li\u003e\n\u003cli\u003eDesigned to be paired with a matching wire rope thimble (sold separately) to protect the rope inside the loop and keep its shape under load\u003c\/li\u003e\n\u003cli\u003eReusable, bolted connection - clamps can be checked and re-tightened after the rope has settled under initial load, rather than being a one-shot fitting like a swaged ferrule\u003c\/li\u003e\n\u003cli\u003eCompact, lightweight hardware that adds minimal bulk to the finished loop compared with the rope and thimble it is fitted to\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification and matched thread size per rope diameter\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRope diameter\u003c\/th\u003e\n\u003cth\u003eU-bolt thread\u003c\/th\u003e\n\u003cth\u003eClamp length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3mm (≈0.12″)\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003e21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5mm (≈0.20″)\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003e23mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6mm (≈0.24″)\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8mm (≈0.31″)\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10mm (≈0.39″)\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003e34mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11mm (≈0.43″)\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003e36mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13mm (≈0.51″)\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003ctd\u003e42mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14mm (≈0.55″)\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003ctd\u003e44mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWire rope terminations and loops are the core use for this clamp range, wherever a length of wire rope needs to be secured back on itself to form a fixed eye or loop rather than a fixed, non-adjustable end fitting. That covers a wide spread of jobs across the sizes offered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral rigging work, forming a clamped loop termination on a wire rope run\u003c\/li\u003e\n\u003cli\u003eFencing and balustrade wire tensioning, where the clamped loop anchors the tensioned wire run at each end or fitting point\u003c\/li\u003e\n\u003cli\u003ePlayground and agricultural fencing, for securing and tensioning wire runs that see repeated loading and need to be checked over time\u003c\/li\u003e\n\u003cli\u003eGeneral cable securing around the workshop, garden or yard, wherever a loop-back termination is the practical way to finish a wire rope end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the joint is tightened with nuts rather than fixed in one step, it can be checked and re-tightened after the rope has settled under initial load, as covered under Installation Guidance below - useful wherever a tensioned wire run needs periodic maintenance rather than being installed once and left. Pairing the clamp with a matching wire rope thimble - which sits inside the loop to protect the rope from sharp bending and keep the loop shape true - is the recommended way to finish the termination on any of the applications above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Guidance\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the clamp size against the rope diameter\u003c\/strong\u003e before starting, using the table above - the clamp size is not interchangeable between rope diameters, since an oversized or undersized clamp will not seat or grip correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm the loop\u003c\/strong\u003e around a thimble where one is being used, so the loop holds its shape and the rope is not bent sharply at the fold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrient the saddle correctly\u003c\/strong\u003e - the U-shaped part with the flat bearing surface always sits on the standing\/live side of the rope (the part under load), never on the dead\/tail end being clamped off. The rigging trade shorthand for this is \"never saddle a dead horse.\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit multiple clamps on larger diameters\u003c\/strong\u003e - use at least three clamps per termination, spaced roughly 6-7 rope diameters apart, so the load is shared across the full termination rather than concentrated at a single point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten evenly\u003c\/strong\u003e so the saddle draws down firmly onto the rope without crushing or damaging the strands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-tighten after first use\u003c\/strong\u003e - once the rope has been loaded, the strands settle slightly, so check and re-tighten each clamp afterwards to keep the termination secure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"3mm \/ Pack of: 2","offer_id":41330260803718,"sku":"DIN741-3MM-02","price":5.6,"currency_code":"GBP","in_stock":true},{"title":"3mm \/ Pack of: 4","offer_id":41330262409350,"sku":"DIN741-3MM-04","price":5.6,"currency_code":"GBP","in_stock":true},{"title":"3mm \/ Pack of: 10","offer_id":41330262442118,"sku":"DIN741-3MM-10","price":6.72,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 2","offer_id":41330260836486,"sku":"DIN741-5MM-02","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 4","offer_id":41330262474886,"sku":"DIN741-5MM-04","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 10","offer_id":41330262507654,"sku":"DIN741-5MM-10","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 2","offer_id":41330260869254,"sku":"DIN741-6MM-02","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 4","offer_id":41330262540422,"sku":"DIN741-6MM-04","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 10","offer_id":41330262573190,"sku":"DIN741-6MM-10","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 2","offer_id":41330260902022,"sku":"DIN741-8MM-02","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 4","offer_id":41330262605958,"sku":"DIN741-8MM-04","price":7.22,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 10","offer_id":41330262638726,"sku":"DIN741-8MM-10","price":7.97,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 2","offer_id":41330260934790,"sku":"DIN741-10MM-02","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 4","offer_id":41330262671494,"sku":"DIN741-10MM-04","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 10","offer_id":41330262704262,"sku":"DIN741-10MM-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"11mm \/ Pack of: 2","offer_id":41330260967558,"sku":"DIN741-11MM-02","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"11mm \/ Pack of: 4","offer_id":41330262737030,"sku":"DIN741-11MM-04","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"11mm \/ Pack of: 10","offer_id":41330262769798,"sku":"DIN741-11MM-10","price":11.6,"currency_code":"GBP","in_stock":true},{"title":"13mm \/ Pack of: 2","offer_id":41330261000326,"sku":"DIN741-13MM-02","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"13mm \/ Pack of: 4","offer_id":41330262802566,"sku":"DIN741-13MM-04","price":8.35,"currency_code":"GBP","in_stock":true},{"title":"13mm \/ Pack of: 10","offer_id":41330262835334,"sku":"DIN741-13MM-10","price":12.72,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 2","offer_id":41330261033094,"sku":"DIN741-14MM-02","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 4","offer_id":41330262868102,"sku":"DIN741-14MM-04","price":8.97,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 10","offer_id":41330262900870,"sku":"DIN741-14MM-10","price":14.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/za-main.png?v=1725436539"},{"product_id":"galvanised-steel-wire-rope-thimble-din-6899-b","title":"Galvanised Steel Wire Rope Thimble DIN 6899 B","description":"\u003cp\u003e\u003cstrong\u003eGalvanised steel wire rope thimble to DIN 6899, form B\u003c\/strong\u003e, a curved, teardrop-shaped fitting made to sit inside a rope loop (eye splice) and protect the rope from wear while maintaining its natural bend radius wherever it connects to a shackle, hook or ring.\u003c\/p\u003e\n\u003cp\u003eWithout a thimble, a rope loop under load gets pinched into a tight radius against whatever it's attached to, accelerating wear and weakening the rope at that point. The thimble's curved groove spreads the load evenly around the loop and keeps its shape open and round rather than crushed flat, so the rope holds its strength and lasts longer at the termination point.\u003c\/p\u003e\n\u003cp\u003eDIN 6899 covers two forms of wire rope thimble. Form B (this one) is the standard light-pattern thimble used for typical wire rope work; form A is the heavier pattern used with larger chain and heavier rigging gear. Made from galvanised steel, this thimble suits outdoor and general engineering environments where corrosion resistance matters.\u003c\/p\u003e\n\u003cp\u003eEach size in the range is proportioned specifically to its rope diameter: overall length, eye width and eye length all increase together as the rope gets thicker, rather than a handful of eye sizes being shared across multiple rope diameters. That means the eye on a 6mm thimble is genuinely different from the eye on an 8mm or 10mm thimble, even where the difference looks small on paper, so it pays to check the dimensions below rather than assume nearby sizes are interchangeable. Metric measurements are given throughout, with an approximate imperial (inch) equivalent alongside each one for cross-referencing against imperial-spec rope or fittings.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured to DIN 6899, form B, the standard light-pattern wire rope thimble profile, as distinct from the heavier form A pattern used with larger chain and heavier rigging.\u003c\/li\u003e\n\u003cli\u003eGalvanised steel construction resists corrosion, making it suitable for outdoor and general engineering use.\u003c\/li\u003e\n\u003cli\u003eCurved groove profile spreads load evenly around the rope loop, preventing the rope from being pinched or crushed flat under tension.\u003c\/li\u003e\n\u003cli\u003eProtects the rope from wear and abrasion at the eye, and helps maintain the rope's natural bend radius so it keeps its strength.\u003c\/li\u003e\n\u003cli\u003eAvailable across rope diameters from 3mm to 20mm (≈0.12″–0.79″), with overall length and eye dimensions scaled to match each individual rope size rather than shared across sizes.\u003c\/li\u003e\n\u003cli\u003eSits inside the rope loop itself rather than being a separate add-on fitting, compatible with standard wire rope clamps (such as our matching DIN 741 clamps) or a swaged\/spliced termination.\u003c\/li\u003e\n\u003cli\u003eSimple sizing rule: match the thimble to your rope diameter first, then size any connecting shackle or hook to the thimble's eye dimensions, not the rope diameter alone.\u003c\/li\u003e\n\u003cli\u003eEvery metric size is listed with its approximate imperial equivalent, making it straightforward to cross-reference against inch-spec rope or fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanised steel  |  \u003cstrong\u003eStandard:\u003c\/strong\u003e DIN 6899, form B  |  \u003cstrong\u003eRope diameter range:\u003c\/strong\u003e 3mm–20mm (≈0.12″–0.79″)\u003c\/p\u003e\n\u003cp\u003eDimensions per rope diameter:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRope diameter\u003c\/th\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003cth\u003eEye width\u003c\/th\u003e\n\u003cth\u003eEye length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3mm (≈0.12″)\u003c\/td\u003e\n\u003ctd\u003e19.0mm\u003c\/td\u003e\n\u003ctd\u003e3.7mm\u003c\/td\u003e\n\u003ctd\u003e12.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4mm (≈0.16″)\u003c\/td\u003e\n\u003ctd\u003e20.0mm\u003c\/td\u003e\n\u003ctd\u003e4.8mm\u003c\/td\u003e\n\u003ctd\u003e13.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5mm (≈0.20″)\u003c\/td\u003e\n\u003ctd\u003e23.0mm\u003c\/td\u003e\n\u003ctd\u003e6.0mm\u003c\/td\u003e\n\u003ctd\u003e14.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6mm (≈0.24″)\u003c\/td\u003e\n\u003ctd\u003e24.5mm\u003c\/td\u003e\n\u003ctd\u003e7.5mm\u003c\/td\u003e\n\u003ctd\u003e16.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8mm (≈0.31″)\u003c\/td\u003e\n\u003ctd\u003e31.5mm\u003c\/td\u003e\n\u003ctd\u003e9.5mm\u003c\/td\u003e\n\u003ctd\u003e20.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10mm (≈0.39″)\u003c\/td\u003e\n\u003ctd\u003e38.0mm\u003c\/td\u003e\n\u003ctd\u003e11.0mm\u003c\/td\u003e\n\u003ctd\u003e25.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12mm (≈0.47″)\u003c\/td\u003e\n\u003ctd\u003e44.5mm\u003c\/td\u003e\n\u003ctd\u003e13.0mm\u003c\/td\u003e\n\u003ctd\u003e28.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14mm (≈0.55″)\u003c\/td\u003e\n\u003ctd\u003e52.0mm\u003c\/td\u003e\n\u003ctd\u003e16.0mm\u003c\/td\u003e\n\u003ctd\u003e31.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16mm (≈0.63″)\u003c\/td\u003e\n\u003ctd\u003e59.0mm\u003c\/td\u003e\n\u003ctd\u003e18.5mm\u003c\/td\u003e\n\u003ctd\u003e35.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18mm (≈0.71″)\u003c\/td\u003e\n\u003ctd\u003e63.5mm\u003c\/td\u003e\n\u003ctd\u003e21.0mm\u003c\/td\u003e\n\u003ctd\u003e40.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA 20mm (≈0.79″) size is also available, sized in line with the range above.\u003c\/p\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire rope eye terminations: protecting the loop where it's spliced or clamped around a shackle, hook, ring or anchor point, so the rope isn't taking the full load against bare metal.\u003c\/li\u003e\n\u003cli\u003eGeneral rigging: anywhere a wire rope needs a durable, low-wear loop rather than a bare bend against a connecting fitting.\u003c\/li\u003e\n\u003cli\u003eGeneral lifting applications: slings, lifting rope assemblies and tie-down loops where the rope eye takes repeated load and repeated handling.\u003c\/li\u003e\n\u003cli\u003eFencing and balustrade wire installations: looping tensioned wire rope around posts, uprights or fixing points without crushing the wire out of shape at the anchor point.\u003c\/li\u003e\n\u003cli\u003eAgricultural and general engineering rigging: wherever a wire rope loop is formed and needs protecting from wear and abrasion over repeated use.\u003c\/li\u003e\n\u003cli\u003eAnywhere a rope loop needs protecting from wear and abrasion, and needs to keep its round shape rather than being pulled flat under tension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\n\u003cp\u003eFit the thimble as part of forming the rope termination itself, not after the loop is already closed:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLoop the rope around the thimble's outer groove so the thimble sits inside the loop, following its curved profile.\u003c\/li\u003e\n\u003cli\u003eSecure the loop with wire rope clamps (see our matching DIN 741 clamps) or a swaged\/spliced termination; the thimble isn't a standalone fitting, it stays inside the finished loop and is held in place by the termination itself.\u003c\/li\u003e\n\u003cli\u003eMatch the thimble size to your rope diameter first; sizes are not generally interchangeable between adjacent rope diameters, as both the groove and eye dimensions change together.\u003c\/li\u003e\n\u003cli\u003eOnce the loop is formed, choose any connecting shackle, hook or ring to suit the thimble's eye width and eye length, not the rope diameter alone.\u003c\/li\u003e\n\u003cli\u003eOn rigging and lifting applications in particular, check the loop periodically for wear or deformation, since the thimble's role is precisely to take that wear so the rope itself doesn't have to.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"3mm \/ Pack of: 2","offer_id":41330682036358,"sku":"DIN6899B-3MM-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"3mm \/ Pack of: 4","offer_id":41330682069126,"sku":"DIN6899B-3MM-04","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"3mm \/ Pack of: 10","offer_id":41330682101894,"sku":"DIN6899B-3MM-10","price":6.47,"currency_code":"GBP","in_stock":true},{"title":"3mm \/ Pack of: 50","offer_id":41330682134662,"sku":"DIN6899B-3MM-50","price":12.22,"currency_code":"GBP","in_stock":true},{"title":"4mm \/ Pack of: 2","offer_id":41330682167430,"sku":"DIN6899B-4MM-02","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"4mm \/ Pack of: 4","offer_id":41330682200198,"sku":"DIN6899B-4MM-04","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"4mm \/ Pack of: 10","offer_id":41330682232966,"sku":"DIN6899B-4MM-10","price":6.72,"currency_code":"GBP","in_stock":false},{"title":"4mm \/ Pack of: 50","offer_id":41330682265734,"sku":"DIN6899B-4MM-50","price":11.47,"currency_code":"GBP","in_stock":false},{"title":"5mm \/ Pack of: 2","offer_id":41330682298502,"sku":"DIN6899B-5MM-02","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 4","offer_id":41330682331270,"sku":"DIN6899B-5MM-04","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 10","offer_id":41330682364038,"sku":"DIN6899B-5MM-10","price":6.97,"currency_code":"GBP","in_stock":true},{"title":"5mm \/ Pack of: 50","offer_id":41330682396806,"sku":"DIN6899B-5MM-50","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 2","offer_id":41330682429574,"sku":"DIN6899B-6MM-02","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 4","offer_id":41330682462342,"sku":"DIN6899B-6MM-04","price":6.47,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 10","offer_id":41330682495110,"sku":"DIN6899B-6MM-10","price":8.35,"currency_code":"GBP","in_stock":true},{"title":"6mm \/ Pack of: 50","offer_id":41330682527878,"sku":"DIN6899B-6MM-50","price":17.47,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 2","offer_id":41330682560646,"sku":"DIN6899B-8MM-02","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 4","offer_id":41330682593414,"sku":"DIN6899B-8MM-04","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 10","offer_id":41330682626182,"sku":"DIN6899B-8MM-10","price":8.22,"currency_code":"GBP","in_stock":true},{"title":"8mm \/ Pack of: 50","offer_id":41330682658950,"sku":"DIN6899B-8MM-50","price":17.1,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 2","offer_id":41330682691718,"sku":"DIN6899B-10MM-02","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 4","offer_id":41330682724486,"sku":"DIN6899B-10MM-04","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 10","offer_id":41330682757254,"sku":"DIN6899B-10MM-10","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"10mm \/ Pack of: 50","offer_id":41330682790022,"sku":"DIN6899B-10MM-50","price":19.6,"currency_code":"GBP","in_stock":false},{"title":"12mm \/ Pack of: 2","offer_id":41330682822790,"sku":"DIN6899B-12MM-02","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"12mm \/ Pack of: 4","offer_id":41330682855558,"sku":"DIN6899B-12MM-04","price":8.1,"currency_code":"GBP","in_stock":true},{"title":"12mm \/ Pack of: 10","offer_id":41330682888326,"sku":"DIN6899B-12MM-10","price":10.22,"currency_code":"GBP","in_stock":true},{"title":"12mm \/ Pack of: 50","offer_id":41330682921094,"sku":"DIN6899B-12MM-50","price":27.35,"currency_code":"GBP","in_stock":false},{"title":"14mm \/ Pack of: 2","offer_id":41330682953862,"sku":"DIN6899B-14MM-02","price":7.72,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 4","offer_id":41330682986630,"sku":"DIN6899B-14MM-04","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 10","offer_id":41330683019398,"sku":"DIN6899B-14MM-10","price":13.72,"currency_code":"GBP","in_stock":true},{"title":"14mm \/ Pack of: 50","offer_id":41330683052166,"sku":"DIN6899B-14MM-50","price":34.85,"currency_code":"GBP","in_stock":true},{"title":"16mm \/ Pack of: 2","offer_id":41330683084934,"sku":"DIN6899B-16MM-02","price":8.22,"currency_code":"GBP","in_stock":true},{"title":"16mm \/ Pack of: 4","offer_id":41330683117702,"sku":"DIN6899B-16MM-04","price":9.85,"currency_code":"GBP","in_stock":true},{"title":"16mm \/ Pack of: 10","offer_id":41330683150470,"sku":"DIN6899B-16MM-10","price":17.22,"currency_code":"GBP","in_stock":true},{"title":"16mm \/ Pack of: 50","offer_id":41330683183238,"sku":"DIN6899B-16MM-50","price":47.85,"currency_code":"GBP","in_stock":true},{"title":"18mm \/ Pack of: 2","offer_id":41330683216006,"sku":"DIN6899B-18MM-02","price":10.35,"currency_code":"GBP","in_stock":true},{"title":"18mm \/ Pack of: 4","offer_id":41330683248774,"sku":"DIN6899B-18MM-04","price":12.1,"currency_code":"GBP","in_stock":false},{"title":"18mm \/ Pack of: 10","offer_id":41330683281542,"sku":"DIN6899B-18MM-10","price":17.98,"currency_code":"GBP","in_stock":false},{"title":"18mm \/ Pack of: 50","offer_id":41330683314310,"sku":"DIN6899B-18MM-50","price":51.22,"currency_code":"GBP","in_stock":false},{"title":"20mm \/ Pack of: 2","offer_id":41330683347078,"sku":"DIN6899B-20MM-02","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"20mm \/ Pack of: 4","offer_id":41330683379846,"sku":"DIN6899B-20MM-04","price":13.35,"currency_code":"GBP","in_stock":true},{"title":"20mm \/ Pack of: 10","offer_id":41330683412614,"sku":"DIN6899B-20MM-10","price":21.22,"currency_code":"GBP","in_stock":true},{"title":"20mm \/ Pack of: 50","offer_id":41330683445382,"sku":"DIN6899B-20MM-50","price":67.97,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/ka-main.png?v=1725460544"}],"url":"https:\/\/diyuk.co\/collections\/wire-rope-fittings.oembed","provider":"DIYUK LTD","version":"1.0","type":"link"}