{"title":"Workshop \u0026 Consumables","description":null,"products":[{"product_id":"large-polythene-dust-sheet-4m-x-5m-7-micron","title":"Large Polythene Dust Sheet 4m x 5m - Waterproof Decorating Cover","description":"\u003cp\u003e\u003cstrong\u003eLarge polythene dust sheet, 4m x 5m (20m² \/ approx. 215 sq ft), 7 micron standard grade\u003c\/strong\u003e - a lightweight, waterproof plastic sheet made for protecting furniture, floors and fixtures during painting, decorating and general DIY or trade work.\u003c\/p\u003e\n\u003cp\u003eMade from polythene (plastic sheeting) to a standard 7 micron gauge, the sheet forms a continuous waterproof barrier against paint splashes, dust, dirt and general mess, while remaining light enough to drape easily over furniture, sofas and other awkward shapes without pulling into heavy, bulky folds. The polythene's natural static cling helps it grip and stay in place once it is draped over upholstery and other surfaces, rather than sliding off mid-job, and the thin gauge means it is just as easy to cut down to size or tape into place for smaller areas and awkward edges. As with any dust sheet, its job is simply to form a barrier between the work being done and the surfaces underneath, catching splashes and dust before they reach carpets, upholstery or exposed woodwork.\u003c\/p\u003e\n\u003cp\u003eAt 4m x 5m, the sheet is large enough to cover a full room's furniture in one go rather than needing several smaller sheets pieced together across a sofa, bed or set of shelving. That matters for two reasons: it gives enough coverage to protect a whole room at once, and a single large sheet leaves far fewer gaps and joins than multiple smaller ones for dust, drips or spills to find their way through underneath.\u003c\/p\u003e\n\u003cp\u003eBeing both waterproof and lightweight makes it equally suited to indoor decorating jobs and to covering items left outdoors, and because it is light and easy to handle, tradespeople can carry several sheets between jobs without adding much weight or bulk to a van or toolbox.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 4m x 5m (20m² \/ approx. 215 sq ft) coverage - enough to protect a full room's furniture with a single sheet\u003c\/li\u003e\n\u003cli\u003e7 micron standard-weight polythene - light enough to drape over furniture, sofas and awkward shapes without heavy, bulky folding\u003c\/li\u003e\n\u003cli\u003eContinuous waterproof barrier against paint splashes, dust, dirt and general decorating or trade mess\u003c\/li\u003e\n\u003cli\u003eNatural static cling helps the sheet grip and stay in place over upholstery rather than slipping off mid-job\u003c\/li\u003e\n\u003cli\u003eSingle large sheet construction - fewer joins and gaps than piecing together several smaller dust sheets\u003c\/li\u003e\n\u003cli\u003eEasy to cut down to size or tape into place, so it suits smaller jobs and awkward edges as well as full-room coverage\u003c\/li\u003e\n\u003cli\u003eLightweight at approximately 250g (0.55lb) per sheet, so it is easy to handle, fold flat and store between jobs\u003c\/li\u003e\n\u003cli\u003eSuits both household DIY and professional trade decorating work, and doubles as an outdoor waterproof cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Waterproof polythene (plastic sheeting)\u003c\/li\u003e\n\u003cli\u003eThickness: 7 micron (standard\/lightweight grade)\u003c\/li\u003e\n\u003cli\u003eSize: 4m x 5m (20m²) - approx. 13.1ft x 16.4ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePainting and decorating - draping over sofas, beds, wardrobes and other furniture to catch paint splashes and dust while walls and ceilings are painted or wallpapered\u003c\/li\u003e\n\u003cli\u003eProtecting flooring - carpets, wood or tiled floors - as temporary dust and drip protection during any overhead decorating or DIY work\u003c\/li\u003e\n\u003cli\u003eProtecting fixtures and fittings such as kitchen units, bathroom suites, staircases and doors during refurbishment and renovation work\u003c\/li\u003e\n\u003cli\u003eGeneral DIY and renovation work where dust from sanding, cutting or general building work needs to be kept off furniture and floors\u003c\/li\u003e\n\u003cli\u003eCovering building materials, timber and other site supplies to help keep them dry and protected from rain\u003c\/li\u003e\n\u003cli\u003eCovering garden furniture, equipment and other items left outside\u003c\/li\u003e\n\u003cli\u003eGeneral household or trade protective covering wherever a large, gap-free waterproof cover is needed\u003c\/li\u003e\n\u003cli\u003eWell suited to trade decorators moving quickly from room to room, since one large sheet covers a whole room without repositioning several smaller ones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"Default Title","offer_id":40009532833926,"sku":"DUSTSHEET","price":7.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/dust_main.png?v=1763667951"},{"product_id":"e6013-mild-steel-rutile-cellulosic-arc-welding-electrodes","title":"E6013 Mild Steel Rutile-Cellulosic Arc Welding Electrodes","description":"\u003cp\u003e\u003cstrong\u003eThese E6013 mild steel arc welding electrodes are classified E 38 0 RC 11 to EN ISO 2560-A (AWS A5.1: E6013)\u003c\/strong\u003e, the standard general-purpose consumable for manual metal arc (MMA\/stick) welding of mild and low-carbon structural and fabrication steels.\u003c\/p\u003e\n\u003cp\u003eThe rutile-cellulosic flux coating is the defining feature of this electrode type: it produces a very active, intensive arc with easy striking and re-striking, good penetration, and a self-releasing slag that lifts away cleanly from the weld as it cools rather than needing to be chipped off. Deposited beads are smooth and slightly convex, blending into the base metal without undercutting. The coating is reasonably tolerant of light surface rust, mill scale, and galvanised, primed or painted steel, and the electrodes run on AC and DC power in either polarity, so they suit the widest range of stick welders, including basic transformer sets with a lower open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eUsable in all welding positions, including vertical-down, this electrode type is especially suited to tack welds, root runs and short repair welds thanks to its easy arc control and strong gap-bridging ability – useful for thinner sheet (under around 5mm) as well as general fabrication work. Deposited weld metal typically has a carbon-manganese composition with a yield strength of around 400MPa (58,000psi), tensile strength of around 510MPa (74,000psi) and elongation of around 28%, giving consistent, reliable welds across the size range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClassified E6013 (E 38 0 RC 11 to EN ISO 2560-A; AWS A5.1: E6013) – a widely recognised, general-purpose electrode standard for mild steel MMA welding\u003c\/li\u003e\n\u003cli\u003eRutile-cellulosic flux coating gives a very active, intensive arc that strikes and re-strikes easily, even on basic AC transformer welders\u003c\/li\u003e\n\u003cli\u003eSelf-releasing slag lifts cleanly away from the weld as it cools, cutting down on chipping and clean-up between passes\u003c\/li\u003e\n\u003cli\u003eRuns on AC or DC power in either polarity, for compatibility across the widest range of stick welding sets\u003c\/li\u003e\n\u003cli\u003eUsable in all welding positions including vertical-down, with strong gap-bridging ability on imperfect joint fit-up\u003c\/li\u003e\n\u003cli\u003eReasonably tolerant of light surface rust, mill scale, and galvanised, primed or painted steel\u003c\/li\u003e\n\u003cli\u003eDeposited weld metal strength: yield around 400MPa (58,000psi), tensile around 510MPa (74,000psi), elongation around 28%\u003c\/li\u003e\n\u003cli\u003eSupplied in 8 diameter and length combinations, from 2.0mm x 300mm (0.08in x 11.8in) up to 5.0mm x 450mm (0.20in x 17.7in), to match the job in hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eRecommended current\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.0mm (0.08in)\u003c\/td\u003e\n\u003ctd\u003e300mm (11.8in)\u003c\/td\u003e\n\u003ctd\u003e50-70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5mm (0.10in)\u003c\/td\u003e\n\u003ctd\u003e350mm (13.8in)\u003c\/td\u003e\n\u003ctd\u003e60-100A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.2mm (0.13in)\u003c\/td\u003e\n\u003ctd\u003e350mm (13.8in)\u003c\/td\u003e\n\u003ctd\u003e80-150A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.2mm (0.13in)\u003c\/td\u003e\n\u003ctd\u003e450mm (17.7in)\u003c\/td\u003e\n\u003ctd\u003e80-150A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4.0mm (0.16in)\u003c\/td\u003e\n\u003ctd\u003e350mm (13.8in)\u003c\/td\u003e\n\u003ctd\u003e100-200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4.0mm (0.16in)\u003c\/td\u003e\n\u003ctd\u003e450mm (17.7in)\u003c\/td\u003e\n\u003ctd\u003e100-200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.0mm (0.20in)\u003c\/td\u003e\n\u003ctd\u003e350mm (13.8in)\u003c\/td\u003e\n\u003ctd\u003e150-290A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.0mm (0.20in)\u003c\/td\u003e\n\u003ctd\u003e450mm (17.7in)\u003c\/td\u003e\n\u003ctd\u003e150-290A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eCurrent ranges are a general starting guide for this electrode classification – always fine-tune within the range to suit base metal thickness, joint type and welding position, favouring the lower end for vertical-down work and thinner sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelding Guidance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch diameter to the job: smaller diameters (2.0-2.5mm) suit thin sheet, tack welds and root passes, while larger diameters (4.0-5.0mm) suit thicker sections and give faster deposition\u003c\/li\u003e\n\u003cli\u003eStrike the arc with a scratch or tap start and hold a short, steady arc length for a stable, controlled bead\u003c\/li\u003e\n\u003cli\u003eThe self-releasing slag lifts away on its own as the weld cools – only light brushing is normally needed to clear any remaining residue before the next pass or a finishing coat\u003c\/li\u003e\n\u003cli\u003eStay within the recommended current range for the diameter in use (see Specification table above), favouring the lower end for vertical-down work and thinner sheet, and the higher end for thicker sections and flat-position runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith an easy-to-strike, all-position arc and reasonable tolerance for less-than-pristine surface preparation, this electrode type suits a wide range of general fabrication, repair and maintenance welding, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral steel fabrication and workshop repair jobs, from one-off fixes to small production runs\u003c\/li\u003e\n\u003cli\u003eStructural steelwork and site welding, including vertical-down passes on installed sections\u003c\/li\u003e\n\u003cli\u003eAgricultural and site machinery repair, where reliable arc starting on basic power sources matters\u003c\/li\u003e\n\u003cli\u003eTrailer and vehicle chassis repair, thanks to the electrode's gap-bridging ability on uneven or worn joints\u003c\/li\u003e\n\u003cli\u003eGate, railing and fence construction, including thinner box section and sheet steel under around 5mm\u003c\/li\u003e\n\u003cli\u003eTack welding and root passes ahead of a fill pass, where a hot, easy-starting arc speeds up setup\u003c\/li\u003e\n\u003cli\u003eOutdoor and field repair work on steel with light surface rust, mill scale, or galvanised, primed or painted coatings, where full surface preparation isn't practical\u003c\/li\u003e\n\u003cli\u003eAny workshop or site job needing a versatile, all-position electrode that runs reliably on both AC and DC welding sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"2.0mm x 300mm \/ 1 pc","offer_id":40003513385094,"sku":"WELDING-2.0mm x 300mm-01 pc","price":5.6,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 2 pcs","offer_id":40003513417862,"sku":"WELDING-2.0mm x 300mm-02 pcs","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 3 pcs","offer_id":40003513450630,"sku":"WELDING-2.0mm x 300mm-03 pcs","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 4 pcs","offer_id":40003513483398,"sku":"WELDING-2.0mm x 300mm-04 pcs","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 5 pcs","offer_id":40003513516166,"sku":"WELDING-2.0mm x 300mm-05 pcs","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 6 pcs","offer_id":40003513221254,"sku":"WELDING-2.0mm x 300mm-06 pcs","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"2.0mm x 300mm \/ 10 pcs","offer_id":40003513254022,"sku":"WELDING-2.0mm x 300mm-10 pcs","price":7.72,"currency_code":"GBP","in_stock":true},{"title":"2.5mm x 350mm \/ 1 pc","offer_id":40003513548934,"sku":"WELDING-2.5mm x 350mm-01 pc","price":5.6,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 2 pcs","offer_id":40003513581702,"sku":"WELDING-2.5mm x 350mm-02 pcs","price":5.72,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 3 pcs","offer_id":40003513614470,"sku":"WELDING-2.5mm x 350mm-03 pcs","price":5.72,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 4 pcs","offer_id":40003513647238,"sku":"WELDING-2.5mm x 350mm-04 pcs","price":5.85,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 5 pcs","offer_id":40003513680006,"sku":"WELDING-2.5mm x 350mm-05 pcs","price":6.85,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 6 pcs","offer_id":40003513712774,"sku":"WELDING-2.5mm x 350mm-06 pcs","price":6.97,"currency_code":"GBP","in_stock":false},{"title":"2.5mm x 350mm \/ 10 pcs","offer_id":40003513286790,"sku":"WELDING-2.5mm x 350mm-10 pcs","price":7.35,"currency_code":"GBP","in_stock":false},{"title":"3.2mm x 350mm \/ 1 pc","offer_id":40003513745542,"sku":"WELDING-3.2mm x 350mm-01 pc","price":5.6,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 2 pcs","offer_id":40003513778310,"sku":"WELDING-3.2mm x 350mm-02 pcs","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 3 pcs","offer_id":40003513811078,"sku":"WELDING-3.2mm x 350mm-03 pcs","price":6.85,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 4 pcs","offer_id":40003513843846,"sku":"WELDING-3.2mm x 350mm-04 pcs","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 5 pcs","offer_id":40003513876614,"sku":"WELDING-3.2mm x 350mm-05 pcs","price":7.22,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 6 pcs","offer_id":40003513909382,"sku":"WELDING-3.2mm x 350mm-06 pcs","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 350mm \/ 10 pcs","offer_id":40003513319558,"sku":"WELDING-3.2mm x 350mm-10 pcs","price":8.1,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 1 pc","offer_id":40003513942150,"sku":"WELDING-3.2mm x 450mm-01 pc","price":8.36,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 2 pcs","offer_id":40003513974918,"sku":"WELDING-3.2mm x 450mm-02 pcs","price":8.52,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 3 pcs","offer_id":40003514007686,"sku":"WELDING-3.2mm x 450mm-03 pcs","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 4 pcs","offer_id":40003514040454,"sku":"WELDING-3.2mm x 450mm-04 pcs","price":8.97,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 5 pcs","offer_id":40003514073222,"sku":"WELDING-3.2mm x 450mm-05 pcs","price":9.22,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 6 pcs","offer_id":40003514105990,"sku":"WELDING-3.2mm x 450mm-06 pcs","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"3.2mm x 450mm \/ 10 pcs","offer_id":40003513352326,"sku":"WELDING-3.2mm x 450mm-10 pcs","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 1 pc","offer_id":40003514138758,"sku":"WELDING-4.0mm x 350mm-01 pc","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 2 pcs","offer_id":40003514171526,"sku":"WELDING-4.0mm x 350mm-02 pcs","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 3 pcs","offer_id":40003514204294,"sku":"WELDING-4.0mm x 350mm-03 pcs","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 4 pcs","offer_id":40003514237062,"sku":"WELDING-4.0mm x 350mm-04 pcs","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 5 pcs","offer_id":40003514269830,"sku":"WELDING-4.0mm x 350mm-05 pcs","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 6 pcs","offer_id":40003514302598,"sku":"WELDING-4.0mm x 350mm-06 pcs","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 350mm \/ 10 pcs","offer_id":40003514335366,"sku":"WELDING-4.0mm x 350mm-10 pcs","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 1 pc","offer_id":40003514368134,"sku":"WELDING-4.0mm x 450mm-01 pc","price":8.47,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 2 pcs","offer_id":40003514400902,"sku":"WELDING-4.0mm x 450mm-02 pcs","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 3 pcs","offer_id":40003514433670,"sku":"WELDING-4.0mm x 450mm-03 pcs","price":8.97,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 4 pcs","offer_id":40003514466438,"sku":"WELDING-4.0mm x 450mm-04 pcs","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 5 pcs","offer_id":40003514499206,"sku":"WELDING-4.0mm x 450mm-05 pcs","price":9.6,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 6 pcs","offer_id":40003514531974,"sku":"WELDING-4.0mm x 450mm-06 pcs","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"4.0mm x 450mm \/ 10 pcs","offer_id":40003514564742,"sku":"WELDING-4.0mm x 450mm-10 pcs","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 1 pc","offer_id":40003514597510,"sku":"WELDING-5.0mm x 350mm-01 pc","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 2 pcs","offer_id":40003514630278,"sku":"WELDING-5.0mm x 350mm-02 pcs","price":6.97,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 3 pcs","offer_id":40003514663046,"sku":"WELDING-5.0mm x 350mm-03 pcs","price":7.22,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 4 pcs","offer_id":40003514695814,"sku":"WELDING-5.0mm x 350mm-04 pcs","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 5 pcs","offer_id":40003514728582,"sku":"WELDING-5.0mm x 350mm-05 pcs","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 6 pcs","offer_id":40003514761350,"sku":"WELDING-5.0mm x 350mm-06 pcs","price":8.1,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 350mm \/ 10 pcs","offer_id":40003514794118,"sku":"WELDING-5.0mm x 350mm-10 pcs","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 1 pc","offer_id":40003514826886,"sku":"WELDING-5.0mm x 450mm-01 pc","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 2 pcs","offer_id":40003514859654,"sku":"WELDING-5.0mm x 450mm-02 pcs","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 3 pcs","offer_id":40003514892422,"sku":"WELDING-5.0mm x 450mm-03 pcs","price":9.85,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 4 pcs","offer_id":40003514925190,"sku":"WELDING-5.0mm x 450mm-04 pcs","price":10.35,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 5 pcs","offer_id":40003514957958,"sku":"WELDING-5.0mm x 450mm-05 pcs","price":10.85,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 6 pcs","offer_id":40003514990726,"sku":"WELDING-5.0mm x 450mm-06 pcs","price":11.47,"currency_code":"GBP","in_stock":true},{"title":"5.0mm x 450mm \/ 10 pcs","offer_id":40003515023494,"sku":"WELDING-5.0mm x 450mm-10 pcs","price":13.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/welding-rods-e6013_diyuk_01-main-a_v2.png?v=1791298878"},{"product_id":"wet-dry-abrasive-sandpaper-sheets-230x280mm","title":"Wet \u0026 Dry Abrasive Sandpaper Sheets 230mm x 280mm (100-1500 Grit)","description":"\u003cp\u003e\u003cstrong\u003eWet \u0026amp; dry abrasive sandpaper sheets, 230 x 280mm (9.06 x 11.02in), running the full grit range from 100 (coarse) up to 1500 (ultra-fine)\u003c\/strong\u003e, with a waterproof coating that supports both traditional dry sanding and lubricated wet sanding on paint, lacquer, filler and plastic surfaces. The sheets are supplied across eight grit grades (100, 240, 360, 400, 600, 800, 1000 and 1500), covering everything from initial stock removal through to an ultra-fine finishing pass. Particle sizes across the range follow the FEPA P-grade classification (ISO 6344) for coated abrasives, the standard reference most trade and hobbyist sandpaper is graded against.\u003c\/p\u003e\n\u003cp\u003eThe waterproof coating keeps the abrasive grain firmly bonded to the sheet when it's used with water or a sanding lubricant, so the paper resists breaking down and clogging far better than an ordinary dry-only sandpaper would under the same conditions, a real advantage when working through several grades in sequence on the same panel. The backing itself also changes across the range to suit the job: the coarsest 100 grit sheet uses a stronger, stiffer backing built for aggressive stock removal, while the 240 grit sheet and everything finer than it uses a softer, more flexible backing that conforms closely to curved or contoured panels, which is what makes it suited to hand-flatting shaped bodywork by eye rather than only flat surfaces. Because the coating and backing are matched to the job across the whole range, the same waterproof sheet format carries a refinishing job through every stage, from first cut to final polish, simply by swapping grit rather than switching to a different type of abrasive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSheet size held constant at 230 x 280mm (9.06 x 11.02in) across every grit in the range, so a pad or holder sized for one grit fits them all\u003c\/li\u003e\n\u003cli\u003eWaterproof coating rated for both dry sanding and lubricated wet sanding, on paint, lacquer, filler and plastic surfaces\u003c\/li\u003e\n\u003cli\u003eBonded abrasive grain resists breaking down and clogging during wet use, compared with an ordinary dry-only sandpaper\u003c\/li\u003e\n\u003cli\u003eFull eight-grade grit range from 100 (coarse) through to 1500 (ultra-fine), covering everything from stock removal to final polishing prep\u003c\/li\u003e\n\u003cli\u003eStronger, stiffer backing on the 100 grit sheet, built for aggressive stock removal and stripping paint or surface rust\u003c\/li\u003e\n\u003cli\u003eSofter, more flexible backing from 240 grit upward, conforming closely to curved or contoured panels for hand-flatting by eye\u003c\/li\u003e\n\u003cli\u003eParticle sizes graded to the FEPA P-grade classification (ISO 6344) for coated abrasives, from ≈160 microns at 100 grit down to ≈12 microns at 1500 grit\u003c\/li\u003e\n\u003cli\u003eSuitable across paint, lacquer, filler and plastic substrates, not limited to a single material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe sheet size and waterproof coating stay the same across every grit in the range; the table below sets out the sheet format, and the grit reference table that follows sets out how each individual grade is typically used.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSheet size\u003c\/th\u003e\n\u003cth\u003eGrit range\u003c\/th\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e230 x 280mm (9.06 x 11.02in)\u003c\/td\u003e\n\u003ctd\u003e100 – 1500\u003c\/td\u003e\n\u003ctd\u003eWaterproof, suitable for wet or dry use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eGrit reference\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGrit grade\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003cth\u003eNominal particle size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003eCoarse stock removal, stripping paint\/rust\u003c\/td\u003e\n\u003ctd\u003e≈160 microns (0.006in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003ctd\u003eShaping filler, removing coarse scratches\u003c\/td\u003e\n\u003ctd\u003e≈60 microns (0.0024in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003ctd\u003ePrimer\/surfacer preparation\u003c\/td\u003e\n\u003ctd\u003e≈40 microns (0.0016in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003eFine pre-paint surface preparation\u003c\/td\u003e\n\u003ctd\u003e≈35 microns (0.0014in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003eDe-nibbing and flatting between coats\u003c\/td\u003e\n\u003ctd\u003e≈26 microns (0.001in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003eFlatting lacquer\/clear coat\u003c\/td\u003e\n\u003ctd\u003e≈22 microns (0.0009in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003eFine finishing, polishing preparation\u003c\/td\u003e\n\u003ctd\u003e≈18 microns (0.0007in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003eUltra-fine finishing, final polishing prep\u003c\/td\u003e\n\u003ctd\u003e≈12 microns (0.0005in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eParticle sizes follow the FEPA P-grade classification (ISO 6344) for coated abrasives; exact grain distribution varies slightly between abrasive manufacturers, so the figures above are nominal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe grit range runs from coarse initial work through to an ultra-fine finish, so a single product line can carry a job from first cut to final polish without switching to a different type of abrasive:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive bodywork and paint refinishing: primer\/surfacer preparation with the 360 grit sheet, fine pre-paint surface preparation at 400, de-nibbing and flatting between coats at 600, cutting back lacquer or clear coat at 800, and fine-to-ultra-fine polishing preparation with the 1000 and 1500 grades\u003c\/li\u003e\n\u003cli\u003eStripping old paint or surface rust back to bare material with the coarse 100 grit sheet, ready for refinishing\u003c\/li\u003e\n\u003cli\u003eWet-flatting curved or contoured bodywork panels by hand, using the softer, flexible backing on the 240 grit sheet and finer to follow the shape of the panel rather than sand flat spots into it\u003c\/li\u003e\n\u003cli\u003eFinishing exotic hardwoods and plastics, working from a coarser grade down through the finer grades for a progressively smoother surface\u003c\/li\u003e\n\u003cli\u003eSharpening or stropping whittling and carving knife edges on the finer grit sheets, where the smaller ≈18-12 micron particle sizes at 1000 and 1500 grit refine an edge without removing excess material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"1500 \/ 01 Sheet","offer_id":40003519545478,"sku":"SANDPAPER-1500-1 Sheet","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 02 Sheets","offer_id":40003519578246,"sku":"SANDPAPER-1500-2 Sheets","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 03 Sheets","offer_id":40003519611014,"sku":"SANDPAPER-1500-3 Sheets","price":8.1,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 04 Sheets","offer_id":40003519643782,"sku":"SANDPAPER-1500-4 Sheets","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 05 Sheets","offer_id":40003519709318,"sku":"SANDPAPER-1500-5 Sheets","price":9.6,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 10 Sheets","offer_id":40003517677702,"sku":"SANDPAPER-1500-10 Sheets","price":15.22,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 15 Sheets","offer_id":40003517644934,"sku":"SANDPAPER-1500-15 Sheets","price":18.97,"currency_code":"GBP","in_stock":true},{"title":"1500 \/ 20 Sheets","offer_id":40003517612166,"sku":"SANDPAPER-1500-20 Sheets","price":22.72,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 01 Sheet","offer_id":40003519381638,"sku":"SANDPAPER-1000-1 Sheet","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 02 Sheets","offer_id":40003519414406,"sku":"SANDPAPER-1000-2 Sheets","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 03 Sheets","offer_id":40003519447174,"sku":"SANDPAPER-1000-3 Sheets","price":8.22,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 04 Sheets","offer_id":40003519479942,"sku":"SANDPAPER-1000-4 Sheets","price":9.1,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 05 Sheets","offer_id":40003519512710,"sku":"SANDPAPER-1000-5 Sheets","price":9.85,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 10 Sheets","offer_id":40003517776006,"sku":"SANDPAPER-1000-10 Sheets","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 15 Sheets","offer_id":40003517743238,"sku":"SANDPAPER-1000-15 Sheets","price":19.85,"currency_code":"GBP","in_stock":true},{"title":"1000 \/ 20 Sheets","offer_id":40003517710470,"sku":"SANDPAPER-1000-20 Sheets","price":23.72,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 01 Sheet","offer_id":40003519217798,"sku":"SANDPAPER-800-1 Sheet","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 02 Sheets","offer_id":40003519250566,"sku":"SANDPAPER-800-2 Sheets","price":7.22,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 03 Sheets","offer_id":40003519283334,"sku":"SANDPAPER-800-3 Sheets","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 04 Sheets","offer_id":40003519316102,"sku":"SANDPAPER-800-4 Sheets","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 05 Sheets","offer_id":40003519348870,"sku":"SANDPAPER-800-5 Sheets","price":9.22,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 10 Sheets","offer_id":40003517874310,"sku":"SANDPAPER-800-10 Sheets","price":13.72,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 15 Sheets","offer_id":40003517841542,"sku":"SANDPAPER-800-15 Sheets","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"800 \/ 20 Sheets","offer_id":40003517808774,"sku":"SANDPAPER-800-20 Sheets","price":21.47,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 01 Sheet","offer_id":40003519053958,"sku":"SANDPAPER-600-1 Sheet","price":6.1,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 02 Sheets","offer_id":40003519086726,"sku":"SANDPAPER-600-2 Sheets","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 03 Sheets","offer_id":40003519119494,"sku":"SANDPAPER-600-3 Sheets","price":7.85,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 04 Sheets","offer_id":40003519152262,"sku":"SANDPAPER-600-4 Sheets","price":8.47,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 05 Sheets","offer_id":40003519185030,"sku":"SANDPAPER-600-5 Sheets","price":9.22,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 10 Sheets","offer_id":40003517972614,"sku":"SANDPAPER-600-10 Sheets","price":13.6,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 15 Sheets","offer_id":40003517939846,"sku":"SANDPAPER-600-15 Sheets","price":17.85,"currency_code":"GBP","in_stock":true},{"title":"600 \/ 20 Sheets","offer_id":40003517907078,"sku":"SANDPAPER-600-20 Sheets","price":21.22,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 01 Sheet","offer_id":40003518890118,"sku":"SANDPAPER-400-1 Sheet","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 02 Sheets","offer_id":40003518922886,"sku":"SANDPAPER-400-2 Sheets","price":6.72,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 03 Sheets","offer_id":40003518955654,"sku":"SANDPAPER-400-3 Sheets","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 04 Sheets","offer_id":40003518988422,"sku":"SANDPAPER-400-4 Sheets","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 05 Sheets","offer_id":40003519021190,"sku":"SANDPAPER-400-5 Sheets","price":7.97,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 10 Sheets","offer_id":40003518070918,"sku":"SANDPAPER-400-10 Sheets","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 15 Sheets","offer_id":40003518038150,"sku":"SANDPAPER-400-15 Sheets","price":13.35,"currency_code":"GBP","in_stock":true},{"title":"400 \/ 20 Sheets","offer_id":40003518005382,"sku":"SANDPAPER-400-20 Sheets","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"360 \/ 01 Sheet","offer_id":40003518726278,"sku":"SANDPAPER-360-1 Sheet","price":5.85,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 02 Sheets","offer_id":40003518759046,"sku":"SANDPAPER-360-2 Sheets","price":6.23,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 03 Sheets","offer_id":40003518791814,"sku":"SANDPAPER-360-3 Sheets","price":6.72,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 04 Sheets","offer_id":40003518824582,"sku":"SANDPAPER-360-4 Sheets","price":7.1,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 05 Sheets","offer_id":40003518857350,"sku":"SANDPAPER-360-5 Sheets","price":7.48,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 10 Sheets","offer_id":40003518169222,"sku":"SANDPAPER-360-10 Sheets","price":10.47,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 15 Sheets","offer_id":40003518136454,"sku":"SANDPAPER-360-15 Sheets","price":13.35,"currency_code":"GBP","in_stock":false},{"title":"360 \/ 20 Sheets","offer_id":40003518103686,"sku":"SANDPAPER-360-20 Sheets","price":16.47,"currency_code":"GBP","in_stock":false},{"title":"240 \/ 01 Sheet","offer_id":40003518562438,"sku":"SANDPAPER-240-1 Sheet","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 02 Sheets","offer_id":40003518595206,"sku":"SANDPAPER-240-2 Sheets","price":6.72,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 03 Sheets","offer_id":40003518627974,"sku":"SANDPAPER-240-3 Sheets","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 04 Sheets","offer_id":40003518660742,"sku":"SANDPAPER-240-4 Sheets","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 05 Sheets","offer_id":40003518693510,"sku":"SANDPAPER-240-5 Sheets","price":7.97,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 10 Sheets","offer_id":40003518267526,"sku":"SANDPAPER-240-10 Sheets","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 15 Sheets","offer_id":40003518234758,"sku":"SANDPAPER-240-15 Sheets","price":13.35,"currency_code":"GBP","in_stock":true},{"title":"240 \/ 20 Sheets","offer_id":40003518201990,"sku":"SANDPAPER-240-20 Sheets","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 01 Sheet","offer_id":40003518398598,"sku":"SANDPAPER-100-1 Sheet","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 02 Sheets","offer_id":40003518431366,"sku":"SANDPAPER-100-2 Sheets","price":6.72,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 03 Sheets","offer_id":40003518464134,"sku":"SANDPAPER-100-3 Sheets","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 04 Sheets","offer_id":40003518496902,"sku":"SANDPAPER-100-4 Sheets","price":7.48,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 05 Sheets","offer_id":40003518529670,"sku":"SANDPAPER-100-5 Sheets","price":7.97,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 10 Sheets","offer_id":40003518365830,"sku":"SANDPAPER-100-10 Sheets","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 15 Sheets","offer_id":40003518333062,"sku":"SANDPAPER-100-15 Sheets","price":13.35,"currency_code":"GBP","in_stock":true},{"title":"100 \/ 20 Sheets","offer_id":40003518300294,"sku":"SANDPAPER-100-20 Sheets","price":16.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/products\/635d7a6ecde421d9579346ee.png?v=1737726208"},{"product_id":"premium-w2-adjustable-hose-clips-stainless-steel","title":"DIYUK W2 Stainless Steel Worm Drive Hose Clips, Adjustable Pipe Clamps, 8-210mm, 18 Sizes","description":"\u003cp\u003e\u003cstrong\u003eW2 stainless steel worm drive hose clamps\u003c\/strong\u003e in 18 sizes, from 8-12mm (0.31-0.47in) up to 190-210mm (7.48-8.27in), for a secure, adjustable grip on hoses, ducting and pipes in plumbing, HVAC and workshop jobs.\u003c\/p\u003e\n\u003cp\u003eThe band and housing are stainless steel, giving strong resistance to rust and general weathering compared with a fully galvanised clamp of the same size. The screw is zinc-plated steel rather than stainless.\u003c\/p\u003e\n\u003cp\u003eThe worm drive mechanism itself - a screw thread engaging an embossed band, 9mm (0.35in) wide and 0.7mm (0.03in) thick - allows fine, even tightening across the full clamping range. A recommended torque of 4.0 Nm (approx. 35 lbf·in) is specified as a guide to correct fitting without overtightening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eW2-grade hybrid construction: stainless steel band and housing for strong resistance to rust and general weathering\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel screw\u003c\/li\u003e\n\u003cli\u003eWorm drive tightening mechanism for fine, even adjustment right across the clamping range, rather than fixed steps\u003c\/li\u003e\n\u003cli\u003eSlim 9mm (0.35in) wide, 0.7mm (0.03in) thick band, keeping the clamp low-profile once fitted\u003c\/li\u003e\n\u003cli\u003eClamping range embossed on the band, so each size is easy to identify\u003c\/li\u003e\n\u003cli\u003eRecommended tightening torque of 4.0 Nm (approx. 35 lbf·in), to guide correct fitting without overtightening\u003c\/li\u003e\n\u003cli\u003eSupplied across 18 clamping-diameter sizes from 8-12mm (0.31-0.47in) up to 190-210mm (7.48-8.27in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBand \u0026amp; housing: Stainless steel · Screw: Zinc-plated steel\u003c\/li\u003e\n\u003cli\u003eGrade: W2\u003c\/li\u003e\n\u003cli\u003eBand width: 9mm · Band thickness: 0.7mm\u003c\/li\u003e\n\u003cli\u003eRecommended tightening torque: 4.0 Nm\u003c\/li\u003e\n\u003cli\u003eMechanism: Worm drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFull size range\u003c\/strong\u003e (clamping diameter): each size is named by its closed and fully-open clamping diameter - for example, a 16-25mm clamp closes down to 16mm and opens as wide as 25mm - so choose the row whose range comfortably spans your measured diameter, ideally with the screw still short of the end of its travel once tightened.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping Range (mm)\u003c\/th\u003e\n\u003cth\u003eClamping Range (in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8-12mm\u003c\/td\u003e\n\u003ctd\u003e0.31-0.47in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10-16mm\u003c\/td\u003e\n\u003ctd\u003e0.39-0.63in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12-22mm\u003c\/td\u003e\n\u003ctd\u003e0.47-0.87in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16-25mm\u003c\/td\u003e\n\u003ctd\u003e0.63-0.98in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20-32mm\u003c\/td\u003e\n\u003ctd\u003e0.79-1.26in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25-40mm\u003c\/td\u003e\n\u003ctd\u003e0.98-1.57in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30-45mm\u003c\/td\u003e\n\u003ctd\u003e1.18-1.77in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40-60mm\u003c\/td\u003e\n\u003ctd\u003e1.57-2.36in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50-70mm\u003c\/td\u003e\n\u003ctd\u003e1.97-2.76in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60-80mm\u003c\/td\u003e\n\u003ctd\u003e2.36-3.15in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-90mm\u003c\/td\u003e\n\u003ctd\u003e2.76-3.54in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90-110mm\u003c\/td\u003e\n\u003ctd\u003e3.54-4.33in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100-120mm\u003c\/td\u003e\n\u003ctd\u003e3.94-4.72in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e110-130mm\u003c\/td\u003e\n\u003ctd\u003e4.33-5.12in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120-140mm\u003c\/td\u003e\n\u003ctd\u003e4.72-5.51in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e140-160mm\u003c\/td\u003e\n\u003ctd\u003e5.51-6.30in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e170-190mm\u003c\/td\u003e\n\u003ctd\u003e6.69-7.48in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e190-210mm\u003c\/td\u003e\n\u003ctd\u003e7.48-8.27in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing a size:\u003c\/strong\u003e measure the outer diameter of the hose once it's fitted over the connector it will be clamped to (not the hose alone) - it should close within its stated range with the screw still able to turn, not at the very end of its travel. If the measured diameter falls close to the top of one clamp's range, it's worth sizing up so the band still has clamping force in reserve once seated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHVAC and ducting connections, securing flexible ducting and hose runs onto spigots and connectors\u003c\/li\u003e\n\u003cli\u003eGeneral domestic and agricultural plumbing, including washing machine drain hoses, wherever a flexible hose or pipe needs clamping onto a barbed or ridged fitting rather than being solvent-welded or compression-jointed\u003c\/li\u003e\n\u003cli\u003eGeneral workshop and light industrial hose and pipe fastening, with the mid-to-large sizes (40-60mm up to 190-210mm) suited to larger-bore hose and ducting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Guidance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSlide the open clamp over the hose before pushing the hose onto its fitting - it's much harder to thread a clamp on afterwards once the hose is seated. Push the hose fully home on the barb, then centre the clamp over the ridged or barbed section of the fitting so the band sits on the reinforced part of the hose rather than overhanging its end. Tighten evenly to around 4.0 Nm (approx. 35 lbf·in), turning the screw steadily rather than in short bursts and checking the hose hasn't twisted or ridden up the fitting as the band closes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich size do I need?\u003c\/strong\u003e\u003cbr\u003eMeasure the hose once it is fitted over its connector, then choose the size whose range spans that diameter. Each size is named by its closed and fully open diameter, for example 16-25mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the whole hose clamp stainless steel?\u003c\/strong\u003e\u003cbr\u003eThe band and housing are stainless steel; the screw is zinc-plated steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should I make it?\u003c\/strong\u003e\u003cbr\u003eTighten evenly to around 4.0 Nm (approx. 35 lbf·in), the recommended torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell the sizes apart?\u003c\/strong\u003e\u003cbr\u003eThe clamping range is embossed on every band, for example 100-120.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"8-12mm \/ 1","offer_id":53516708610429,"sku":"DIN3017-8-12mm-01","price":5.35,"currency_code":"GBP","in_stock":true},{"title":"8-12mm \/ 2","offer_id":53516708643197,"sku":"DIN3017-8-12mm-02","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"8-12mm \/ 5","offer_id":53516708675965,"sku":"DIN3017-8-12mm-05","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"8-12mm \/ 10","offer_id":53516708708733,"sku":"DIN3017-8-12mm-10","price":7.53,"currency_code":"GBP","in_stock":true},{"title":"10-16mm \/ 1","offer_id":53516652020093,"sku":"DIN3017-10-16mm-01","price":5.35,"currency_code":"GBP","in_stock":true},{"title":"10-16mm \/ 2","offer_id":53516697436541,"sku":"DIN3017-10-16mm-02","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"10-16mm \/ 5","offer_id":53516697469309,"sku":"DIN3017-10-16mm-05","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"10-16mm \/ 10","offer_id":53516652052861,"sku":"DIN3017-10-16mm-10","price":7.53,"currency_code":"GBP","in_stock":true},{"title":"12-22mm \/ 1","offer_id":53516652085629,"sku":"DIN3017-12-22mm-01","price":5.35,"currency_code":"GBP","in_stock":true},{"title":"12-22mm \/ 2","offer_id":53516697633149,"sku":"DIN3017-12-22mm-02","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"12-22mm \/ 5","offer_id":53516697665917,"sku":"DIN3017-12-22mm-05","price":5.97,"currency_code":"GBP","in_stock":true},{"title":"12-22mm \/ 10","offer_id":53516652118397,"sku":"DIN3017-12-22mm-10","price":7.72,"currency_code":"GBP","in_stock":true},{"title":"16-25mm \/ 1","offer_id":53516652151165,"sku":"DIN3017-16-25mm-01","price":5.35,"currency_code":"GBP","in_stock":true},{"title":"16-25mm \/ 2","offer_id":53516697829757,"sku":"DIN3017-16-25mm-02","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"16-25mm \/ 5","offer_id":53516697862525,"sku":"DIN3017-16-25mm-05","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"16-25mm \/ 10","offer_id":53516652183933,"sku":"DIN3017-16-25mm-10","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"20-32mm \/ 1","offer_id":53516707692925,"sku":"DIN3017-20-32mm-01","price":5.35,"currency_code":"GBP","in_stock":true},{"title":"20-32mm \/ 2","offer_id":53516707725693,"sku":"DIN3017-20-32mm-02","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"20-32mm \/ 5","offer_id":53516707758461,"sku":"DIN3017-20-32mm-05","price":6.85,"currency_code":"GBP","in_stock":true},{"title":"20-32mm \/ 10","offer_id":53516707791229,"sku":"DIN3017-20-32mm-10","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"25-40mm \/ 1","offer_id":53516707823997,"sku":"DIN3017-25-40mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"25-40mm \/ 2","offer_id":53516707856765,"sku":"DIN3017-25-40mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"25-40mm \/ 5","offer_id":53516707889533,"sku":"DIN3017-25-40mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"25-40mm \/ 10","offer_id":53516707922301,"sku":"DIN3017-25-40mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"30-45mm \/ 1","offer_id":53516707955069,"sku":"DIN3017-30-45mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"30-45mm \/ 2","offer_id":53516707987837,"sku":"DIN3017-30-45mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"30-45mm \/ 5","offer_id":53516708020605,"sku":"DIN3017-30-45mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"30-45mm \/ 10","offer_id":53516708053373,"sku":"DIN3017-30-45mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"40-60mm \/ 1","offer_id":53516708086141,"sku":"DIN3017-40-60mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"40-60mm \/ 2","offer_id":53516708118909,"sku":"DIN3017-40-60mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"40-60mm \/ 5","offer_id":53516708151677,"sku":"DIN3017-40-60mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"40-60mm \/ 10","offer_id":53516708184445,"sku":"DIN3017-40-60mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"50-70mm \/ 1","offer_id":53516708217213,"sku":"DIN3017-50-70mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"50-70mm \/ 2","offer_id":53516708249981,"sku":"DIN3017-50-70mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"50-70mm \/ 5","offer_id":53516708282749,"sku":"DIN3017-50-70mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"50-70mm \/ 10","offer_id":53516708315517,"sku":"DIN3017-50-70mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"60-80mm \/ 1","offer_id":53516708348285,"sku":"DIN3017-60-80mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"60-80mm \/ 2","offer_id":53516708381053,"sku":"DIN3017-60-80mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"60-80mm \/ 5","offer_id":53516708413821,"sku":"DIN3017-60-80mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"60-80mm \/ 10","offer_id":53516708446589,"sku":"DIN3017-60-80mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"70-90mm \/ 1","offer_id":53516708479357,"sku":"DIN3017-70-90mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"70-90mm \/ 2","offer_id":53516708512125,"sku":"DIN3017-70-90mm-02","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"70-90mm \/ 5","offer_id":53516708544893,"sku":"DIN3017-70-90mm-05","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"70-90mm \/ 10","offer_id":53516708577661,"sku":"DIN3017-70-90mm-10","price":8.6,"currency_code":"GBP","in_stock":true},{"title":"90-110mm \/ 1","offer_id":53516708741501,"sku":"DIN3017-90-110mm-01","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"90-110mm \/ 2","offer_id":53516708774269,"sku":"DIN3017-90-110mm-02","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"90-110mm \/ 5","offer_id":53516708807037,"sku":"DIN3017-90-110mm-05","price":8.47,"currency_code":"GBP","in_stock":true},{"title":"90-110mm \/ 10","offer_id":53516708839805,"sku":"DIN3017-90-110mm-10","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"100-120mm \/ 1","offer_id":53516652740989,"sku":"DIN3017-100-120mm-01","price":5.47,"currency_code":"GBP","in_stock":true},{"title":"100-120mm \/ 2","offer_id":53516697502077,"sku":"DIN3017-100-120mm-02","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"100-120mm \/ 5","offer_id":53516697534845,"sku":"DIN3017-100-120mm-05","price":7.51,"currency_code":"GBP","in_stock":true},{"title":"100-120mm \/ 10","offer_id":53516652773757,"sku":"DIN3017-100-120mm-10","price":9.22,"currency_code":"GBP","in_stock":true},{"title":"110-130mm \/ 1","offer_id":53516652806525,"sku":"DIN3017-110-130mm-01","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"110-130mm \/ 2","offer_id":53516697567613,"sku":"DIN3017-110-130mm-02","price":6.23,"currency_code":"GBP","in_stock":true},{"title":"110-130mm \/ 5","offer_id":53516697600381,"sku":"DIN3017-110-130mm-05","price":8.47,"currency_code":"GBP","in_stock":true},{"title":"110-130mm \/ 10","offer_id":53516652839293,"sku":"DIN3017-110-130mm-10","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"120-140mm \/ 1","offer_id":53516652872061,"sku":"DIN3017-120-140mm-01","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"120-140mm \/ 2","offer_id":53516697698685,"sku":"DIN3017-120-140mm-02","price":6.47,"currency_code":"GBP","in_stock":true},{"title":"120-140mm \/ 5","offer_id":53516697731453,"sku":"DIN3017-120-140mm-05","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"120-140mm \/ 10","offer_id":53516652904829,"sku":"DIN3017-120-140mm-10","price":12.72,"currency_code":"GBP","in_stock":true},{"title":"140-160mm \/ 1","offer_id":53516652937597,"sku":"DIN3017-140-160mm-01","price":5.85,"currency_code":"GBP","in_stock":true},{"title":"140-160mm \/ 2","offer_id":53516697764221,"sku":"DIN3017-140-160mm-02","price":6.47,"currency_code":"GBP","in_stock":true},{"title":"140-160mm \/ 5","offer_id":53516697796989,"sku":"DIN3017-140-160mm-05","price":9.35,"currency_code":"GBP","in_stock":true},{"title":"140-160mm \/ 10","offer_id":53516652970365,"sku":"DIN3017-140-160mm-10","price":12.72,"currency_code":"GBP","in_stock":true},{"title":"170-190mm \/ 1","offer_id":53516653003133,"sku":"DIN3017-170-190mm-01","price":5.72,"currency_code":"GBP","in_stock":true},{"title":"170-190mm \/ 2","offer_id":53516697895293,"sku":"DIN3017-170-190mm-02","price":7.1,"currency_code":"GBP","in_stock":true},{"title":"170-190mm \/ 5","offer_id":53516697928061,"sku":"DIN3017-170-190mm-05","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"170-190mm \/ 10","offer_id":53516653035901,"sku":"DIN3017-170-190mm-10","price":11.47,"currency_code":"GBP","in_stock":true},{"title":"190-210mm \/ 1","offer_id":53516653068669,"sku":"DIN3017-190-210mm-01","price":5.6,"currency_code":"GBP","in_stock":true},{"title":"190-210mm \/ 2","offer_id":53516697960829,"sku":"DIN3017-190-210mm-02","price":6.97,"currency_code":"GBP","in_stock":true},{"title":"190-210mm \/ 5","offer_id":53516697993597,"sku":"DIN3017-190-210mm-05","price":8.47,"currency_code":"GBP","in_stock":true},{"title":"190-210mm \/ 10","offer_id":53516653101437,"sku":"DIN3017-190-210mm-10","price":10.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/hose-clips-w2_diyuk_01-main-a_v1.png?v=1791362764"},{"product_id":"ladies-floral-gardening-gloves-nitrile-coated-3-pack","title":"Ladies Floral Gardening Gloves - Nitrile Coated (3 Pack)","description":"\u003cp\u003e\u003cstrong\u003eLadies floral gardening gloves with a nitrile-coated palm\u003c\/strong\u003e, a 100% polyester knit glove built on a 13-gauge liner, finished with a water-resistant nitrile (NBR, nitrile butadiene rubber) dip over the palm and fingers and a comfortable welt cuff at the wrist. The 13-gauge knit is a fine, close construction that keeps the glove thin and supple, so it moves with the hand rather than fighting it, useful for anything more fiddly than heavy digging, from handling seed trays to tying in stems.\u003c\/p\u003e\n\u003cp\u003eThe nitrile palm dip is the defining feature of the glove. Because the coating is dipped directly onto the knit liner rather than sewn in as a separate lining, it stays bonded to the fingers and palm through repeated flexing, the areas that take the most abrasion when gripping tool handles, canes, pots and plant stems. The coating gives a durable, water-resistant grip and also increases resistance to greases and oils compared with an uncoated knit glove, so the glove keeps its grip in damp soil or on wet handles.\u003c\/p\u003e\n\u003cp\u003eThe uncoated back of the hand is left as plain breathable polyester knit, which keeps hands cooler than a fully-coated glove over a long session and adds a little stretch across the knuckles for a closer fit. The welt cuff, a firm, ribbed knit band at the opening, sits snugly around the wrist to stop soil and debris working their way inside while gardening. The glove is made to EN ISO 21420, the general requirements standard for protective gloves, and is rated Protection Category I.\u003c\/p\u003e\n\u003cp\u003eBecause this is a women's-specific glove rather than a general-purpose or men's equivalent, the size run is scaled accordingly; it's worth measuring your hand against the table below rather than assuming your usual size in a unisex glove.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% polyester knit liner (13-gauge) for a snug, lightweight fit with good finger dexterity for detailed work\u003c\/li\u003e\n\u003cli\u003eNitrile (NBR) palm dip bonded directly to the liner for a durable grip that won't bunch, slip or peel away with flexing\u003c\/li\u003e\n\u003cli\u003eWater-resistant coating that also increases resistance to greases and oils compared with an uncoated knit glove\u003c\/li\u003e\n\u003cli\u003eBreathable, uncoated knit back keeps hands cooler than a fully-coated glove during extended wear\u003c\/li\u003e\n\u003cli\u003eWelt cuff at the wrist for a comfortable, secure fit that helps keep soil and debris out\u003c\/li\u003e\n\u003cli\u003eMade to EN ISO 21420 (general requirements for protective gloves), Protection Category I\u003c\/li\u003e\n\u003cli\u003eSized specifically for women's hands across four sizes, covering a hand circumference range of 15.2cm–22.9cm \/ 5.98″–9.02″\u003c\/li\u003e\n\u003cli\u003eAvailable in an assortment of floral colourways and patterns\u003c\/li\u003e\n\u003cli\u003eSupplied on a hangtag, ready for retail display\u003c\/li\u003e\n\u003cli\u003e3-year warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCore construction, standard and warranty for this glove are set out below, with the full size range given immediately underneath.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 100% polyester knit liner (13-gauge) with nitrile (NBR) palm dip\u003c\/li\u003e\n\u003cli\u003eStandard: EN ISO 21420 (general requirements for protective gloves), Protection Category I\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eHand length\u003c\/th\u003e\n\u003cth\u003eHand circumference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 (XS)\u003c\/td\u003e\n\u003ctd\u003e16.0cm \/ 6.30″\u003c\/td\u003e\n\u003ctd\u003e15.2cm \/ 5.98″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7 (S)\u003c\/td\u003e\n\u003ctd\u003e17.1cm \/ 6.73″\u003c\/td\u003e\n\u003ctd\u003e17.8cm \/ 7.01″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 (M)\u003c\/td\u003e\n\u003ctd\u003e18.2cm \/ 7.17″\u003c\/td\u003e\n\u003ctd\u003e20.3cm \/ 7.99″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9 (L)\u003c\/td\u003e\n\u003ctd\u003e19.2cm \/ 7.56″\u003c\/td\u003e\n\u003ctd\u003e22.9cm \/ 9.02″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTo choose your size, measure hand length from the tip of the middle finger to the base of the palm at the wrist crease, and hand circumference around the widest part of the palm (excluding the thumb), keeping the tape flat but not pulled tight. Compare both measurements to the table above and choose the size that best matches; if you fall between two sizes, the larger size will generally be the more comfortable fit for gardening use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral gardening, weeding and planting: the nitrile palm grips tool handles, plant pots and canes securely even when hands or soil are damp\u003c\/li\u003e\n\u003cli\u003ePotting, seed sowing and pricking out, where the fine 13-gauge knit and flexible fit allow for handling small plants, seeds and delicate stems without losing feel\u003c\/li\u003e\n\u003cli\u003ePruning, deadheading, tying-in climbers and general trellis work, where a close, flexible fit helps when working with wire, twine and thin stems\u003c\/li\u003e\n\u003cli\u003eLight agricultural and horticultural tasks around a smallholding, allotment or garden centre\u003c\/li\u003e\n\u003cli\u003eGeneral warehouse and household handling tasks where a grippy, water-resistant palm is useful for moving stock, sorting damp items or general outdoor maintenance\u003c\/li\u003e\n\u003cli\u003eExtended sessions where breathability matters: the uncoated knit back is cooler on the hand than a fully-dipped glove over a long day's work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"6 - XS","offer_id":57531177075069,"sku":"GLOVES-GARDEN-XS","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"7 - S","offer_id":57531177042301,"sku":"GLOVES-GARDEN-S","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"8 - M","offer_id":57531177009533,"sku":"GLOVES-GARDEN-M","price":9.97,"currency_code":"GBP","in_stock":true},{"title":"9 - L","offer_id":57531176976765,"sku":"GLOVES-GARDEN-L","price":9.97,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/gardengloves1.png?v=1771355897"},{"product_id":"115mm-turbo-diamond-cutting-disc-heavy-duty-2-2mm","title":"115mm Turbo Diamond Cutting Disc (4.5\") - Heavy Duty 2.2mm Thick Blade","description":"\u003cp\u003e\u003cstrong\u003e115mm Turbo Diamond Cutting Disc (4.5in) with a heavy-duty 2.2mm thick steel core\u003c\/strong\u003e, built for noticeably more rigidity than thinner, budget-grade blades. That extra core thickness reduces the flex, or \"whip\", that thin discs are prone to when working through dense, hard materials, giving a straighter, more controlled cut and a disc that holds up better under load. It's rated for both dry and wet cutting, so it can be run neat on site or with a water feed where dust suppression is needed, and it's sized to suit the 115mm (4.5in) angle grinders that are the standard handheld cutting tool on most sites and in most workshops.\u003c\/p\u003e\n\u003cp\u003eThe blade uses a continuous turbo-rim diamond edge rather than a segmented rim, combined with a series of shallow cooling grooves cut around the perimeter. Where a fully segmented disc leaves gaps in the cutting edge, the turbo rim keeps the edge continuous for a cleaner line, while the grooves still do the job of a segmented rim in clearing cutting dust from the disc face and giving the blade somewhere for heat to disperse as it works – which in turn keeps the segments running cooler over longer cuts. The diamond segments themselves are bonded to the steel core using a hot-press sintering process – fusing the diamond grit into the segment under heat and pressure – and are set at a 7.8mm (0.31in) segment height, noticeably deeper than the segment height typical of thin-kerf economy blades, for a longer usable life before the disc needs replacing.\u003c\/p\u003e\n\u003cp\u003eThis is a general-purpose disc for masonry and tile cutting, suitable across porcelain, granite, natural stone, ceramic tile, concrete, brick and general masonry, rather than a specialist blade limited to one material. The 22.23mm (7\/8in) bore is the industry-standard fitting, matching the flange-and-locking-nut arrangement used on the vast majority of 115mm (4.5in) angle grinders, so no adapters or bushes are needed – the disc drops straight onto the arbor of the grinder you already own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty 2.2mm (0.09in) thick steel core – more rigid than thinner budget blades, reducing flex and \"whip\" when cutting dense or hard materials\u003c\/li\u003e\n\u003cli\u003eRated for both dry and wet cutting, giving flexibility for on-site work or dust-suppressed cutting with a water feed\u003c\/li\u003e\n\u003cli\u003eContinuous turbo-rim diamond edge with shallow cooling grooves for efficient dust clearance and heat dissipation during use\u003c\/li\u003e\n\u003cli\u003eDiamond segments hot-press sintered onto the core at a 7.8mm (0.31in) segment height, for extended working life over typical thin-kerf blades\u003c\/li\u003e\n\u003cli\u003e115mm (4.5in) diameter with a 22.23mm (7\/8in) bore, fitting the standard flange-and-locking-nut arrangement used on virtually all 115mm angle grinders\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose cutting across a wide range of masonry and tile materials, including porcelain, granite, natural stone, ceramic tile, concrete and brick, rather than a single-material specialist disc\u003c\/li\u003e\n\u003cli\u003eManufactured to EN 13236, with a maximum operating speed of 13,300 RPM (rated to 80 m\/s)\u003c\/li\u003e\n\u003cli\u003eCompact, lightweight steel-core disc at approximately 0.12kg (4.2oz) per blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc diameter\u003c\/td\u003e\n\u003ctd\u003e115mm (4.5in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore diameter\u003c\/td\u003e\n\u003ctd\u003e22.23mm (0.875in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade thickness\u003c\/td\u003e\n\u003ctd\u003e2.2mm (0.09in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSegment height\u003c\/td\u003e\n\u003ctd\u003e7.8mm (0.31in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum operating speed\u003c\/td\u003e\n\u003ctd\u003e13,300 RPM (rated to 80 m\/s per EN 13236)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting method\u003c\/td\u003e\n\u003ctd\u003eDry or wet cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety standard\u003c\/td\u003e\n\u003ctd\u003eEN 13236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore material\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\/finish\u003c\/td\u003e\n\u003ctd\u003eGold (brass-gold anodised diamond segments)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12kg (approx. 4.2oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs a general-purpose masonry and tile disc, this blade covers most of the cutting jobs a tradesperson or DIYer is likely to face on a renovation or building site, across both dry and wet cutting methods:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting porcelain and ceramic wall or floor tiles to size during kitchen and bathroom fitting, including trimming tiles around pipework, sockets and other fixtures\u003c\/li\u003e\n\u003cli\u003eTrimming granite, natural stone and paving slabs when laying or edging a patio, or cutting stone to fit around borders and obstacles\u003c\/li\u003e\n\u003cli\u003eChasing masonry walls for electrical cable and conduit routing\u003c\/li\u003e\n\u003cli\u003eCutting brick and block for general construction, alterations and renovation work, including forming openings or cutting units to size on site\u003c\/li\u003e\n\u003cli\u003eGeneral concrete and masonry cutting on site or in the workshop, wherever a robust, longer-lasting disc is preferred over a disposable thin-kerf blade\u003c\/li\u003e\n\u003cli\u003eWet cutting with a water feed where dust suppression is required, such as indoor tiling work, or dry cutting outdoors where a water supply isn't practical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitting \u0026amp; Safety Guidance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMount the disc onto any standard 115mm angle grinder fitted with a 22.23mm bore arbor, securing it with the grinder's own flange and spindle nut\u003c\/li\u003e\n\u003cli\u003eAlways check the disc's maximum rated speed (13,300 RPM) against your grinder's no-load RPM before fitting – never fit a disc to a grinder capable of exceeding its rated speed\u003c\/li\u003e\n\u003cli\u003eFit the correct guard for the disc and use appropriate PPE (eye, ear and respiratory protection as needed) for the material and cutting method in use\u003c\/li\u003e\n\u003cli\u003eAllow the disc to reach full speed before it contacts the material, and let the diamond segments do the cutting rather than forcing the disc through the material\u003c\/li\u003e\n\u003cli\u003eThis is a cutting disc only, designed to cut with its edge – it must never be used for side grinding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"1","offer_id":57559124836733,"sku":"DIAMOND-DISC-1","price":8.72,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":57559124869501,"sku":"DIAMOND-DISC-2","price":11.1,"currency_code":"GBP","in_stock":true},{"title":"10","offer_id":57559124902269,"sku":"DIAMOND-DISC-10","price":34.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/infografika_diyuk_v3-115mm-turbo-diamond-cutting-disc-heavy-duty-2-2mm.png?v=1790340841"},{"product_id":"high-temperature-stove-flue-sealant-1500c-310ml-black","title":"High Temperature Stove \u0026 Flue Sealant 1500°C - 310ml Black","description":"\u003cp\u003e\u003cstrong\u003eHigh-temperature stove and flue sealant, rated to 1500°C (2732°F)\u003c\/strong\u003e, is a silicate-based black paste purpose-made for sealing solid-fuel stove and flue joints. Rather than remaining a flexible rubber-like compound, it solidifies under heat into a rigid, ceramic-like finish that stays put for the life of the joint.\u003c\/p\u003e\n\u003cp\u003eStandard \"heat resistant\" automotive silicones are typically rated to no more than 300°C and can turn brittle or fail under the sustained heat of a wood burner or multi-fuel stove. This sealant uses a different, silicate-based chemistry: rather than degrading, it vitrifies under heat into a hard, ceramic-like mass that bonds tightly to the surrounding surface, forming a permanent, smoke-tight seal against carbon monoxide and flue-gas leakage.\u003c\/p\u003e\n\u003cp\u003eIt is supplied as a smooth black paste in a standard 310ml (10.5fl oz) cartridge that fits any standard-thread sealant\/caulking gun, and is thixotropic (non-slump), so it can be tooled into vertical and overhead joints without sagging. Once fully solidified and the appliance is brought into use, the joint should be slowly heated up to +250°C (482°F); as it reaches this temperature the sealant turns dark grey and becomes extra-hard, completing the cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated to 1500°C (2732°F) maximum service temperature: engineered specifically for solid-fuel stove and flue joints where ordinary silicone sealants fail.\u003c\/li\u003e\n\u003cli\u003eSilicate-based formula that vitrifies under heat into a rigid, ceramic-like mass rather than degrading like a standard heat-resistant silicone.\u003c\/li\u003e\n\u003cli\u003eForms a permanent, smoke-tight seal that resists carbon monoxide and flue-gas leakage at static, non-moving joints.\u003c\/li\u003e\n\u003cli\u003eThixotropic (non-slump) black paste that holds its shape when tooled into vertical or overhead joints.\u003c\/li\u003e\n\u003cli\u003eSupplied in a 310ml (10.5fl oz) standard-thread cartridge, compatible with any standard sealant\/caulking gun.\u003c\/li\u003e\n\u003cli\u003eNet weight of 724g (1.6lb) per cartridge.\u003c\/li\u003e\n\u003cli\u003eChanges colour from black to dark grey and becomes extra-hard once heat-cured up to +250°C (482°F) in service.\u003c\/li\u003e\n\u003cli\u003eBonds well to cast iron, mild steel, stainless steel, firebrick, concrete, stone and clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum service temperature\u003c\/td\u003e\n\u003ctd\u003e1500°C (2732°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCartridge size\u003c\/td\u003e\n\u003ctd\u003e310ml (10.5fl oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight, per cartridge\u003c\/td\u003e\n\u003ctd\u003e724g (1.6lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour, as supplied \/ solidified\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour, after heat-treatment\u003c\/td\u003e\n\u003ctd\u003eDark grey, extra-hard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCure type\u003c\/td\u003e\n\u003ctd\u003eRigid, vitrifying (does not remain flexible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended post-cure heat-up\u003c\/td\u003e\n\u003ctd\u003eSlowly to +250°C (482°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint type\u003c\/td\u003e\n\u003ctd\u003eStatic (non-moving) joints only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C to +35°C (41°F to 95°F) ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause it is formulated specifically for the sustained heat of solid-fuel appliances rather than general household or automotive use, this sealant is suited to hearth and flue jobs that sit well beyond the working range of an ordinary silicone. Typical applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSealing the joint between a stove spigot and the flue pipe on a wood burner or multi-fuel stove.\u003c\/li\u003e\n\u003cli\u003eBonding flue liners to register plates for a smoke-tight connection at the top of the flue run.\u003c\/li\u003e\n\u003cli\u003eFilling cracks in firebacks and resetting loose firebricks inside the firebox.\u003c\/li\u003e\n\u003cli\u003eSealing pizza ovens and chimineas, which reach similarly high working temperatures.\u003c\/li\u003e\n\u003cli\u003eBonding ceramic rope seals or sealing stove glass into cast iron stove doors.\u003c\/li\u003e\n\u003cli\u003eGeneral hearth and flue maintenance and repair work on any joint that is static rather than subject to movement or vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the cured sealant bonds well to cast iron, mild steel, stainless steel, firebrick, concrete, stone and clay, a single cartridge covers the great majority of solid-fuel hearth and flue repair jobs without needing a different product for each substrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Guidance\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure all surfaces are clean, dry and free from rust, dust or grease before applying.\u003c\/li\u003e\n\u003cli\u003eOn porous substrates such as brick, clay or firebrick, lightly mist the surface with water first; this slows the surface skinning-over and reduces the risk of cracking as the sealant cures.\u003c\/li\u003e\n\u003cli\u003eLoad the cartridge into a standard sealant gun and apply the sealant into the joint.\u003c\/li\u003e\n\u003cli\u003eTool the joint to shape while the sealant is still workable; its thixotropic (non-slump) consistency holds its position in vertical and overhead joints.\u003c\/li\u003e\n\u003cli\u003eApply within the +5°C to +35°C (41°F to 95°F) ambient application temperature range, and leave the sealant to fully solidify before lighting the appliance.\u003c\/li\u003e\n\u003cli\u003eOnce the appliance is brought into use, allow the joint to slowly heat up to +250°C (482°F); the sealant will turn dark grey and become extra-hard as it completes its cure.\u003c\/li\u003e\n\u003cli\u003eThis is a rigid, vitrifying sealant intended for static joints only; do not use it where movement or vibration is expected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOrder before 2pm Mon–Fri for same-day dispatch from our UK warehouse.\u003c\/p\u003e","brand":"DIYUK","offers":[{"title":"1","offer_id":57559406313853,"sku":"SILICONE","price":13.35,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":57559406346621,"sku":"SILICONE - 2 PCS","price":18.72,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":57559406379389,"sku":"SILICONE - 3 PCS","price":23.35,"currency_code":"GBP","in_stock":true},{"title":"4","offer_id":57559406412157,"sku":"SILICONE - 4 PCS","price":27.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/0245\/6454\/files\/stove-sealant_diyuk_01-main-a_v1.png?v=1791201137"}],"url":"https:\/\/diyuk.co\/collections\/workshop-consumables.oembed","provider":"DIYUK LTD","version":"1.0","type":"link"}