Nails
Galvanised Annular Ring Shank Nails, 500g Bags
DIYUK Galvanised Annular Ring Shank Nails, 500g Bags, Bright Zinc Plated (BZP), for Pallets, Timber, Decking & Fencing, 2.5-3.8mm x 40-100mm
20% off applied
Overview
Galvanised annular ring shank nails sold in 500g bags, one size per bag, for pallet making, wooden packaging, fencing, decking and general timber work. The nails are carbon steel with a bright zinc plated (BZP) finish, in six sizes from 2.5mm x 40mm (0.10" x 1.57") to 3.8mm x 100mm (0.15" x 3.94"). Each bag holds 500g of nails (net weight).
The rings along the shank are what make the difference. As the nail is driven, the sharp, concentric rings bite into the surrounding wood fibres and lock in place, so the joint is held by a mechanical key rather than by friction alone. That gives a stronger, more durable hold than a smooth shank nail of the same size, and resistance to the nail backing out ("nail pop") as timber dries, swells or flexes.
Key Features
- Superior holding power: concentric rings lock into the wood fibres for a stronger hold than a smooth shank nail of the same size.
- Resists nail pop: extra grip and withdrawal resistance in timber that expands, contracts and flexes, such as pallet boards, decking boards, fencing timber and sub-floors.
- 500g bags: each bag holds 500g of nails (net weight) in a single size; choose the size from the options.
- Bright zinc plated (BZP): an electro-galvanised coating that protects against rust and corrosion on indoor and outdoor timber projects.
- Diamond point and flat round head: a sharp diamond point for easy driving and reduced wood splitting.
- Carbon steel: consistent strength, with rings that add durability and reliability to every joint.
- Six sizes: 2.5mm x 40mm, 50mm and 60mm; 3.0mm x 70mm and 80mm; 3.8mm x 100mm.
Specification
| Shank type | Annular ring shank |
| Material | Carbon steel |
| Finish | Bright Zinc Plated (BZP): electro-galvanised |
| Head type | Flat round head |
| Point type | Diamond point |
| Sizes (diameter x length) |
2.5mm x 40mm (0.10" x 1.57") 2.5mm x 50mm (0.10" x 1.97") 2.5mm x 60mm (0.10" x 2.36") 3.0mm x 70mm (0.12" x 2.76") 3.0mm x 80mm (0.12" x 3.15") 3.8mm x 100mm (0.15" x 3.94") |
| Supplied in | 500g bags (net weight of nails), one size per bag |
| Recommended use | Pallets and wooden packaging, wooden furniture, decking, fencing, sheds, roofing, framing, cladding, plywood sheathing, sub-floors |
| Wood compatibility | Softwoods (pine, cedar, spruce); suitable for some hardwoods with a pilot hole |
Typical Applications
- Pallets and wooden packaging: pallet making and wooden packaging, where a strong, durable timber joint is needed.
- Wooden furniture: timber assemblies where strength and durability are required.
- Decking and fencing: decking and fence nails for outdoor timber that sees weathering, seasonal movement and loading, where a smooth nail is most likely to back out.
- Roofing and framing: timber-to-timber joints in roofs and walls where a secure, long-term fix matters.
- Cladding, plywood sheathing and sub-floors: board and panel fixing where repeated movement can loosen a plain-shank nail.
Matching length to the job: the 40-60mm (1.57"-2.36") sizes suit lighter work such as cladding, siding, underlayment, roofing shingles and thinner timber sections; the 70-80mm (2.76"-3.15") sizes cover general framing, decking, fencing and typical timber-to-timber joints; the 100mm (3.94") size is for heavy-duty framing, landscaping projects and thicker structural timbers.
Installation Guidance
- Best suited to softwoods such as pine, cedar and spruce, where the rings bite cleanly into the fibres.
- Pre-drill a pilot hole in dense hardwoods before driving, to reduce the risk of splitting the timber.
Made for professionals and DIY enthusiasts alike. Choose the nail engineered for a permanent hold. Choose strength. Choose reliability.
Common Questions
How are they sold?
In 500g bags: each bag holds 500g of nails (net weight) in one size. Pick the size from the options.
Which length do I need?
40mm, 50mm and 60mm ring shank nails for cladding, siding and lighter work; 70mm and 80mm galvanised nails for framing, decking and fencing; 100mm long nails for wood in heavy-duty framing and thicker structural timbers.
Can I use them for pallets?
Yes. Pallets and wooden packaging are among the uses for these ring shank nails, alongside wooden furniture and timber structures such as roofs and walls.
Can I use them outdoors?
Yes. These are fence nails and wood nails for indoor and outdoor projects: the bright zinc plated (BZP) coating protects against rust and corrosion on decking, fencing and sheds.
Do I need a pilot hole?
In softwoods such as pine, cedar and spruce the rings bite cleanly into the fibres. In dense hardwoods, pre-drill a pilot hole to reduce the risk of splitting.
Specifications
| Material | Steel |
|---|---|
| Materials | Steel |
| Finish | Bright Zinc Plated (BZP) |
| Size | 2.5mm x 40mm to 3.8mm x 100mm (6 sizes, diameter x length) |
| Weight | 0.5 kg |
All 6 options and prices
| Size | Price inc. VAT | ex. VAT | Per piece | Select |
|---|---|---|---|---|
| 2.5x40mm | £7.98 | £6.65 | - | |
| 2.5x50mm | £7.98 | £6.65 | - | |
| 2.5x60mm | £7.98 | £6.65 | - | |
| 3.0x70mm | £7.98 | £6.65 | - | |
| 3.0x80mm | £7.98 | £6.65 | - | |
| 3.8x100mm | £7.98 | £6.65 | - | Sold out |
Delivery and returns
Free standard UK delivery, or Next Day Delivery for £0.99 (order by 2pm).
Order before 2pm Mon–Fri for same-day dispatch
60-day returns