Free UK delivery. Order before 2pm Mon–Fri for same-day dispatch from our UK warehouse.

Angle Brackets

Narrow Angle Bracket 150 x 150mm, 2mm

DIYUK Heavy Duty Narrow Angle Brackets 150 x 150mm, 2mm Zinc Plated Steel L Corner Brace, 22mm Wide

£7.48Was£9.35inc. VAT£6.23 ex. VAT£3.74 per piece

20% off applied

Pack Quantity 2
In stock
  • Free standard UK delivery, or Next Day Delivery for £0.99 (order by 2pm)
  • Order before 2pm Mon–Fri for same-day dispatch
  • Free collection in Newton, Preston: order by 2pm, Monday to Friday, and collect the same day. How it works
  • 60-day returns
  • VAT invoices for business customers
Overview

When a timber joint needs real support but the board edge leaves little room, a wide plate will not fit. These narrow angle brackets give you long 150mm (5.91in) legs on both sides in a strip just 22mm (0.87in) wide, so they sit neatly on the narrow edge of a board while spreading the fixing along both pieces.

Each bracket is made from 2mm (0.08in) steel with an accurate 90° angle and finished in bright silver zinc plating. Silver zinc plating suits dry interiors, including spaces with only occasional moisture (service class 2). The brackets are CE marked under a European Technical Assessment.

Key Features

  • Long legs, narrow profile: 150 x 150mm legs, 22mm wide, made to fix to the narrow edges of boards and timbers.
  • Tested strength: manufacturer tests give 7.6 kN characteristic capacity (9.7 kN mean) for a joint made with two brackets under compression, which is 3.8 kN per bracket.
  • Heavy duty 2mm steel: a rigid 2mm gauge across the whole bracket.
  • Corrosion protection: electroplated silver zinc coating over 12 microns thick.
  • Six fixing holes: three 4.5mm (0.18in) holes in each leg, set in a staggered pattern.
  • Simple fixings: 4mm connector (anchor) nails or 4mm wood screws.
  • Accurate right angle: 90° between the legs for square, true joints.

Specification

Leg length (a x b) 150 x 150mm (5.91 x 5.91in)
Width 22mm (0.87in)
Thickness 2mm (0.08in)
Holes 6 x 4.5mm (0.18in), 3 per leg
Angle 90°
Material Steel, silver zinc plated (electroplated zinc, over 12 microns)
Weight per bracket 101g (3.56oz)
Load capacity, joint of two brackets, compression 7.6 kN characteristic (1,709 lbf, 775 kgf); 9.7 kN mean (2,181 lbf, 989 kgf)
Load capacity per bracket 3.8 kN characteristic (854 lbf, 387 kgf)
Test timber density 350 kg/m³ for the stated values; moisture 12.9%
Recommended fixings 4mm connector (anchor) nails or 4mm wood screws
Certification CE marked under a European Technical Assessment

Typical Applications

  • Small carpentry and furniture work, fixed to the narrow edges of boards and panels.
  • Joining and reinforcing timber at right angles, for example a cross member meeting a post.

Installation Guidance

  • Hold the bracket tight into the corner so both legs sit flat against the timber.
  • Fix through all six holes, three in each leg, as in the manufacturer's nailing pattern; the tested load figures apply to this pattern.
  • Use 4mm connector (anchor) nails or 4mm wood screws.
  • The stated loads are for a joint made with two brackets, for example one above and one below a cross member where it meets a post.
Specifications
MaterialSteel
MaterialsSteel
FinishZinc plated
Size150 x 150mm legs, 22mm wide, 2mm thick
Weight101 g each
All 4 options and prices
Pack QuantityPrice inc. VATex. VATPer pieceSelect
2£7.48£6.23£3.74
4£8.78£7.31£2.20
10£10.98£9.15£1.10
20£15.58£12.98£0.78
Delivery and returns

Free standard UK delivery, or Next Day Delivery for £0.99 (order by 2pm).

Order before 2pm Mon–Fri for same-day dispatch

60-day returns

Shipping policy · Refund policy